SPS-10/12/15 Semi-Electric Stacker — Manually Propelled, Powered Lifting

Product Description

The Noveltek SPS-10/12/15 Semi-Electric Stacker is designed for operations that need reliable powered lifting without the full investment of a motorized-drive powered stacker.

The core principle is straightforward: the electric motor handles the work of lifting — the part of stacking that creates the most operator fatigue and injury risk — while the operator manually propels and steers the unit. This division of labor gives smaller facilities, satellite warehouses, and production support areas access to safe, consistent stacking capability at a lower equipment cost than fully powered alternatives.

Three load capacity options (1,000 kg / 1,200 kg / 1,500 kg) allow buyers to select the right working margin for their application. For most single-deep racking and production floor stacking needs up to moderate height, the SPS series provides the capability required without over-specifying.

Available as OEM/ODM for custom mast heights, battery configurations, or handle ergonomics. 100% Made in Taiwan. ISO 9001 certified.

Key Features

• Powered Hydraulic Lifting: Electric motor drives the hydraulic lift system — operator lifts loads to height without manual pumping effort

• Manual Propulsion: Operator pushes and steers the unit, keeping the mechanical footprint simple and the purchase cost accessible

• Three Capacity Options: SPS-10 (1,000 kg), SPS-12 (1,200 kg), SPS-15 (1,500 kg) — select the right capacity margin for your application

• Compact Design: Narrow footprint for movement in tight aisles, storage rooms, and production areas with limited space

• Ergonomic Control Handle: Lift and lower controlled from the operator handle; speed and safety features integrated

• Made in Taiwan: ISO 9001 certified quality; OEM/ODM customization available

Applications

• Small and medium warehouses with light stacking requirements

• Production floor parts storage and kitting areas

• Retail stockroom operations

• Facilities transitioning from fully manual stackers to powered lifting

• Supplementary stacking in areas too narrow for powered-drive equipment

FAQ

Q1：What is the difference between a semi-electric stacker and a fully electric stacker?

A1：A semi-electric (or semi-powered) stacker uses an electric motor to power the hydraulic lift mechanism — raising and lowering loads without manual pumping — but relies on the operator to manually push and steer the unit. A fully electric (powered-drive) stacker has both powered lifting AND powered propulsion, so the operator controls movement electronically. Semi-electric stackers cost less, require no drive battery system, and are appropriate for shorter travel distances and lower-throughput applications.

Q2：What mast heights are available on the SPS-10/12/15?

A2：Mast height options vary by configuration. Contact Noveltek with your required stacking height and load specification for the appropriate SPS model recommendation and available mast height options.