PPS-10/12 Side Mast Reach Mast Powered Pallet Stacker — Narrow Aisle Stacking

Product Description

Warehouse layout is rarely perfectly suited to standard equipment. Narrow aisles, structural column positions, mezzanine clearances, and specific racking geometries can create environments where standard walkie stacker mast geometry prevents efficient or safe operation.

The Noveltek PPS-10/12 Side Mast and Reach Mast series addresses these constraints. The side mast configuration positions the mast to the side rather than in the standard center-front position, enabling operation in aisle widths or overhead clearance situations where a standard mast would interfere. The reach mast option extends outreach capability — allowing the operator to position loads into racking from the aisle rather than driving fully into the bay.

These are specialized configurations — not the starting point for most stacking operations — but for facilities where the constraint is real and standard equipment genuinely cannot operate efficiently, the side and reach mast options provide the engineering solution.

OEM/ODM customization is available for specific aisle dimensions, racking depth, and operational requirements. Noveltek's engineering team can evaluate your facility layout and recommend the appropriate mast configuration and capacity. 100% Made in Taiwan. ISO 9001 certified.

Key Features

• Side Mast Configuration: Mast positioned to the side of the machine rather than center-front — enables operation in specific narrow-aisle and restricted-clearance environments

• Reach Mast Option: Extended reach capability allows the stacker to position loads into racking positions from a standing position in the aisle, without driving fully into the bay

• 1.0T and 1.2T Capacity: Appropriate for standard single-deep pallet loads in the targeted narrow-aisle environments

• Compact Machine Footprint: Designed to minimize the space required for operation in constrained environments

• Powered Lift: Electric hydraulic lift for consistent load elevation without manual effort

• OEM/ODM Available: Custom mast configuration for specific aisle width, rack depth, and operational requirements

• Made in Taiwan: ISO 9001 certified. CE certified.

Applications

• Narrow-aisle warehouses where standard mast geometry creates clearance problems

• Mezzanine and low-ceiling stacking areas with restricted overhead clearance

• Racking configurations requiring extended outreach from aisle position

• Operations needing side-access load placement in specific architectural constraints

• OEM buyers requiring custom mast geometry for specialized equipment offerings

FAQs

Q1: What is the minimum aisle width for the PPS Side Mast stacker?

A1: Minimum aisle width requirements depend on the specific configuration — machine body width, outrigger width, and mast position. Contact Noveltek with your aisle width and racking dimensions for a technical assessment of whether the PPS Side Mast or Reach Mast configuration is appropriate for your facility layout.

Q2: What is the difference between the side mast and reach mast configurations?

A2: The side mast configuration positions the vertical mast to the side of the machine rather than center-front, enabling operation in environments where the standard center mast position creates clearance problems. The reach mast configuration adds forward outreach capability to the mast — allowing the operator to extend the forks and load into racking positions without the machine moving fully into the bay. These address different constraints: side mast for aisle width or structural interference, reach mast for outreach and aisle efficiency.